How to use electronic truck scale correctly

The use of electronic truck scale is as follows:

1. The scale room of electronic truck scale should be equipped with full-time personnel to operate and hold qualification certificates.

2. Department scales personnel to be familiar with the relevant knowledge of electronic truck scale, the correct operation of electronic truck scale.

3. Electronic truck scales should be used within the verification cycle.

4. Before use, the electronic truck scale should be turned on and preheated for about 30min.

5. Carefully check whether the instruments and parts of the electronic truck scale are in good condition, especially check whether there are debris stuck on the scale body and other parts.

6. The car should drive on the electronic truck scale in a straight line at a speed below 5km/h and brake gently; Cars should be parked as far as possible in the electronic truck scale platform center.

7. After the car is stable, start reading the display and recording or printing.

8. Electronic truck scale is strictly prohibited to overload weighing.

9. When not in use after weighing, turn off the electronic truck scale and cut off the power supply.

10. Clean the electronic truck scale often, especially the items scattered on the scale platform should be cleaned up in time.

11. If there is a failure of electronic truck scale, it is necessary to stop using it immediately and report to professionals for repair. Only after verification can it continue to use.